|
Check it out before you buy
|
|
Welcome to our Outdoor division
of Romppai's
Custom Built Pontoon Boats
your way, no commercially made pontoon will compare.
Download railing set ups 1-
Railing Dimensions.pdf or
Railing Dimensions2.pdf cost per foot, 36"gates
see note at bottom of page
All Pontoon Kits Are Canadian Cost Guard approved,
you are not getting something that was just slammed together.
| Just when we thought we couldn't do any better.
Next time your
out looking at factory built pontoon boats take a real close look at how
they are built as well as quality, then come back to this page and take
a closer look at the photo on the left, as well as other links to
photo's on this page. or come out and look at ours, there is no
comparison. After I looked at a factory built pontoon real close,
I would never ride on one and feel safe. would you???? look real
close now!!!
|
|
What a better way to have a great day of fishing or
fishing trip then on your very own pontoon boat, designed just the way
you want it, from fully equipped house boat to just a plain Jane open
deck, we can supply it all.
You can have all the comfort and space to move about, and have
the ultimate in livewells, hot & cold running water, fridge, stove, oven
and 12v power inverters with or with out solar panels, right on board,
oh ya don't forget flushable or chemical toilet and shower.
Some people order them just to put there RV on the deck and take it
off for a party, see weight capacity chart for your needs.
|
|
We at Romppai's Outfitters start with
our custom pontoon kit, were we have them built
in a local factory. if you want something special we can also do it.
We
can make your custom kit. We will
custom assemble your pontoon boat, Pontoon House House boat or pontoon dock or raft to your
specific specifications to fit your budget. then in time come back and
we can add to your Pontoon to make it the way you want, you don't have
to do the whole job in one year, just bring it back for more add on. The picture to the lower
left is a basic U Fab kit of a pontoon boat . the picture in the lower right
is the basic pontoon dock kit. We would also have available all
accessories such as steering wheels councils , railings canopies and
many more options such as house boat cabin kit, pontoon kits would be
available in many different lengths and widths and pontoon size
diameters.
Pontoon
Boats"
At Affordable Prices because we buy our metal direct from the mill by
the truck load we assembled from
our custom Kits and require no welding.
we will build your kit to any stage you want, then you can take it from
there. We have totally redone the
instructions so now they are
easy to follow instructions. after all you have to build them to make
the instructions
Kits are easy on the pocket book and are very simple to assemble. You
can even chose to build or have built for you in stages.
If you like boat building like we
do; this is for you.
They are easy to register. Pickup
would be from our yard in Kaministiquia Ontario Canada. you will find
the price files below to download, when we build your Pontoon there is
"no" shipping cost.
Pontoon Boats Have Many Uses
We build a Pontoon Boats for pleasure and work related applications. They
are ideal for fishing, scuba diving, work boats and as houseboats. many
other uses you can think of. Any way you want it.
They are also used as utility boats, as tour boats and for other
commercial marine applications. Kits can also be used for building docks
and rafts. we end the construction of your pontoon with the install of
the
THE BLACK BOX To protect your investment as well to catch more fish
|
|
Click Here for info on a Electric Pontoon boat
|
Electric
Pontoon Boat
We take any kit and
re-design the back end to be used with these electric motors as well as the
conventional type. With the Lenco 164 Drive Motors you can
manoeuvre around docks and other boats. A great way for
trolling. or just what to save on the environment using
nothing other then 12 DC electricity, you can course all day
on a single charge, providing we set you up with a great
group of 12v deep cycle battery's and a large solar panel,
there is endless possibility's and with the optional remote
control, fish as you go.
Should you want to
switch half way though the day to the conventional type out
board, a flip of a switch and the twin Lenco 164 Drives are
up and out of the way, One drive like pictured above is
mounted on the back end of each Pontoon. They work
just as great on any type of boat.
More
How the Lenco 164 is
installed on a pontoon boat.
We can custom build
any kit for you or retro fit to any Pontoon or boat
|
|
|
Custom Pontoon Boats or Pontoon
Docks & Rafts All Pontoon Kits can come pre assembled to at lest flat deck with
carpeting or a none slip finish on the deck for easy cleaning and on a
EZ -
LOADER TRAILER and you can build from there or we can do the whole job!!
Ready for pick up or shipped to you!!
Are you tired of the rate
race of camp ground and hi seasonal fees? Put your RV right on a pontoon
boat!! Now that's camping & fishin. If you get tired of the view,
just move to the next bay!!!
All docks are now available fully
assembled with carpeting or a none slip finish on the deck for easy
cleaning, if you wish!! |
|
|
See download starting
pricing files
, starting with a base kits like this, we custom
build it from here for you! tell use you dream pontoon an were off.
- 2 aluminum
pontoons, each with side and under keels, front
water deflectors, full length cross-member
supports, sealed chambers at 5 ft. lengths,
front eyes, and a rear mounting bracket for fish
finder or speedometer.
- U bar
cross-members, 2 in. high x width of boat.
Additional bars for reinforcement at motor mount
and bow.
- 4 aluminum
corners c/w mooring eyes.
- FUN
- 3 in. wide
aluminum edging for complete perimeter.
- Towing bar.
- All necessary
nuts, bolts, screws, etc.
- Assembly
booklet.
|
|
|
PONTOON BOAT
BUILDING |
Basic Boat Kit Description
Each standard
8' Pontoon Boat Kit
Contains the following parts
-
2 Aluminium Pontoons
U bar cross members
with 24" centers
4 Aluminums corners
with mooring eyes
Aluminums motor
support (20" transom)
up to 90 hp
1" x 3" Aluminium
edging
Towing Bar
Hardware for
assembly
Assembly
booklet
3/4"
marine grade plywood coated with a two-part marine
epoxy (optional)
Printable caulking (optional)
l
|
Pontoon Boat Kits are made to last
Our
pontoons are made with type 5052 H32
aluminum, an aluminum / magnesium alloy
most resistant to corrosion in fresh and
sea water. The standard thickness is
.081" and .090", .100", .125" or .1875"
is available.
There are solid welded chambers every 5'
and each pontoon has a full length under
keel and side keel for added protection |
|
Aluminum Pontoon Docks, Rafts and
Walkways
are quality constructed to
endure many years of use.
Features
-
Aluminum Pontoon Dock Kits
are available in 4', 6', and 8'
widths with 16" or 19" diameter
pontoons and are available with
optional aluminum hinge sets.
-
Aluminum Walkway Ramps
are available 3' or 4' wide from 10'
to 20' long.
-
Aluminum Pontoon Raft Kits
have larger pontoons to accommodate
more weight. They are available
with 24" diameter pontoons in
various lengths. Raft Kits are made
to accommodate Diving Boards and
Water Slides and are available in
various widths.
All
kits can include:
3/4" marine grade plywood coated with a
two-part marine epoxy (InterguardŽ
345). Two coats on underside and
one coat on top side, light Beige in
color (other light colors available).
Also includes paint able caulking for
edges of sheets
Additional liquid two-part epoxy is
available as well as a non-slip additive
makes for easy clean-up of the deck, an
excellent alternative to installing
carpeting
|
|
|
|
|
You don't find factory built pontoons like
these! |
 |
Center Pontoon for I/O, look closely at how it is made, all
pontoons are constructed the same way, look forward of I/O hole,
you don't find a factory built pontoon
like this! |
I/O |
Main I/O center pontoon
In this photo take note
as to the rails that run down both sides of the pontoon that your cross
members will bolt to, these rails run the full length of the pontoons on
all pontoons. weather it is a pontoon boat, dock or raft, note also the
re-enforcement plates. this type of quality is not found in your
high production brand name pontoon boats, you will find they only have
small 2" wide flat bar L brackets were your cross members bolt to.
Don't take my word for it, take a look at any top name pontoon on the
market the next time you visit your marine dealer and see for your self,
as many people have. This is only one small, but very important part
that holds you whole ship together. WE DO IT RIGHT OR NOT AT ALL!!
Start to finish, from fishing pontoon to house boat and everything
inbetwine, Since these photos were taken, we have improved this
stretcher even more, as well as we worked with our old style we found
there was yet a much better way, as well allows this space to be used
buy the owner, until now that was wasted space, well no more. plus makes
more room/clearance for under deck tanks. |
This is a Pontoon boat that is great to fish from
You will find this Pontoon on Loon Lake in NW
Ont.
Pontoon Boat Kit With Center Pod
|
 |
The centre pod
is
(see
exploded view) available in
standard 10', 15' and 20' lengths and as a full length centre pod.
The centre pod would extend about 27"
past the rear deck ( see photo )
The centre pod adds buoyancy at the rear
of the boat and offsets the weight of the heavier 4 stroke outboard
and fuel.
Because the outboard is mounted at the
rear of the centre pod, the prop always gets a good bite of the
water and rarely cavitates.
The standard centre pod is rated up to
150 hp, optional up to 175 hp, 200 hp, and 250 hp
|
Pontoon Kit with Center Pod |
Commercial Fishing Boat
|
|
|
Fish Harvesting, work, fun, party,
floating office or camp Boats
are also available form
and are primarily used in the Aquaculture industry.
Kits can be manufactured according to your requirements and some
engineering drawing costs may be necessary for some custom applications
Example
- For commercial use as a Fishing
Boat, House Boat.
|
|
Several "PONTOON" Models to
Choose from
Complete
Pontoon Boat
packages can be ordered ready for pick
up on an EZ LOADER
TRAILER, for easy and convenient assembly!!
We will get
you any
trailer you want, not just pontoon trailer's, any time you want, galvanized,
parts and accessories as well. If you need a Pontoon trailer for a
Pontoon boat over 28 feet long or over 8 feet wide, we will custom build
you a trailer using EZ Loader parts.
See our page with more info
CLICK HERE
Including
personal water craft & snowmobile, now see if any other dealer would
do it for you?
Click Here for EZ-Loader trailer info
2009/10 Boat trailers are now here!
Download EZLoader2007.pdf (1.8mb)
(Right-Click
EZLoader2007.pdf link
and "Save As.." to save to your computer
Click image to download 2007 catalog
|
|
 |
Need a trailer call us! we will fix you up the
best way we can. with service 2nd to none, 1st
class all the way, you have our word.
Need To Rent a trailer? Call us!
807-933-4946 |
We have you covered |
Do you want to learn more about pontoon boats? click here
Pontoon Boats
Description: Images and resources dedicated
to the pontoon boat.
All kinds of good info for anyone interested in them)
Our Last Show
Photos
Powered By Honda & E-Z
loader Trailers what a great match!!!
Home |
Please Note: our website is under going a complete up-date, some
information and forms need to be changed, how ever this is going to take some
time. Please bare with use well these changes are made. Do to the very high
demand for our cost saving products, we feel taking down this website would not
be a good chose, we have chose to leave it up well we give it a over
hall..
All our custom made pontoon's of all kinds are built here in Thunder Bay Ont. as
well as Winnipeg MN, some will come out of Quebec if needed, however this would
affect our costs.
This is to save material costs (we bring our raw materials in by the truck
load), shipping cost though out North Western Ont & Manitoba, available in kit
form, or we can custom build your complete pontoon, with 7 different trailer
brands, and 50 models to chose from, like enclosed Newnan's trailers, to car
halers, utility trails, boat trail's, check out our trailer page
Call to order all your marine products you need, including after marker I/O &
Outboard motor parts, catalog order, over 3000 pages, 3 to 4 days delivery, you
SAVE $$$$$
Until we can up-date our Lenco links please use Lenco Marine
website as well the downloads for product spec's
Click Here
Romppai's is a OME for Lenco Drives, Romppai's Wholesale a distributor for Lenco
Marine. If you are a dealer and want the Lenco products, contact our wholesale
division, Note: deals, your minimum order is 5 Lenco drive kits, you can mix the
micro drive, the ultimate JoyRide, both 2hp 24 volt, 3hp 36 volt. Trim Tabs and
hatch lifts also available, Dealer pricing is on our dealer login page. pricing
is in USD converted to CND at time of import, Do to the up and down of our
Canadian dollar, Retail USD pricing download PDF
Here, Tax and duty may apply, see all Lenco products
HERE, we save all our
customers brokerage fees, we do all our own brokerage into Canada
|
|
|
|
Note; more links will be added on the left, top and
bottom, soo look for them as they get added, some will link to older
index pages so nothing is lost, till there all completed This site
is under construction, and these are the look of what all pages will
look like as we complete every thing, you will still come a cross
the old stye pages till i get them all completed, please be advised
i am working very hard to get this completed for all 3 divisions of
our business Thank you for your under standing We
accept debit, and credit card payments with our own debit credit
card terminal, we
also will accept payment by Pay-Pal, due to there much higher fees,
an additional service charge will apply, starting at minimum $3.00,
and can go up on big orders paid with pay-pal.. if you are a
customer that would like to see a shopping cart or buy now buttons
for Pay-Pal, on our site, please send reqest email to info@romppais.com, telling us
your wants.. we are considering it at this time, we want to make
sure all the extra work would be worth wile.... how ever our main
shopping cart will be up and running soon, with a lot of items sold
but our electronic and outdoor products, custom tackle and much
more, you can buy a gift certificate for that special someone by
clicking the pay-pal gift certificate bottom, (no service fee
on gift certificate as our gift to you) |
.jpg)
